108
Facsimile
Transcription
Dec. 1 10.40
Printer skip lines P.J.V.
1245 30 Nov 67
System kept dieing with NON-EX MEM.
Took [marline?] for Emergency maintenance.
BLT stopped at [1?3] claiming 000's were
storing wrong effective address.
Bit 35 of PMA is out. → Russell was confused
MI Bit 11 is out.
Reason BLT wouldn't run was failure
to put machine in PDP-6 MODE
Ran BLT some more. Occasionally it
hung up Bit 25 in the PC was observed
to be on.
Tried swapping 6206 for MA & PC bit
25 with 6206 for Bit 18. Got non ex mem's
with a little waiting Bit 18 of PG was on.
Replaced the 6206 in bit 18, formerly
bit 25.
System up at 1800 DOwn for 5 hrs 15 min
Violent Pounding on the N end
of the 6205's for the Right 1/2 [wd?]
causes the machine to stop with
many 1's in MA and a non-ex mem.
SRR
Notes and Questions
Nobody has written a note for this page yet
Please sign in to write a note for this page