182

OverviewTranscribeVersionsHelp

Facsimile

Transcription

Status: Needs Review

1510 19 Mar 68

167 parity error.

MA=327433

1515 another

MA=270073
257133
257233
316633

19 Mar 68 Mag tape does not see the start sticker
on the tapes (rewind all the tape without stopping on
the sticker).

PJV

March 19, 1968

The reason that the TV Camera's pan motor
would not turn off was that motor relay for "Pan
Right" was stuck closed. Although the relays that
are used for the pan and tilt motors probably have
adequate contact rating for the continuous motor
current (0.25 Amp), they are really too small to handle
the several-amp turn-on surge — especially when
this surge occurs often, as when the motors are
hunting (in a servo loop). The pan motors work all right
now because the wires on the pan-right relay have
been moved over to its unused contacts. If a similar
failure occurs again, a new relay control box should
be built using (six) 5 or 10 amp relays.

J. Gleason

0215 20 Mar 68

167 Parity error
MA2 357267 DATA=0 - apparently [Parity?]
bit dropped.

SRR

Notes and Questions

Nobody has written a note for this page yet

Please sign in to write a note for this page