| 175145
1415 15 Mar 68
IOP parity error WC = 767775
MA = 337777
PAR ERR OUT PIA = 6
IRR
1418 15 Mar 68
anoth 108 parity error WC = 664205
MA = 234307
and again WC = 716305
MA = 262307
WC = 770771
MA = 242773
1505
Replaced the "Remote" + "Lical" lamps on the 545 MAG TAPE TRANPORT with #327 (28V) lamps. The Voltage on the lamps is 16V, and the lamps that had been used were #330 (which are rated at 14V.
J. Gleason
1800
QI STILL DOWN
Worked on QI. Replaced HV [veed?] relay with a relay on 110V line to HV supply. In order to do this, the "Voltage Present" circuit was disabled by disconnecting its HV input and grounding the output. HV now works fine but there semes to be some bug introduced by the previous HV arcs, No vidio output from camera.
may be a destroyed or amp.
Ted [Pamfry?] | 1751415 15 Mar 68
IOP parity error WC = 767775
MA = 337777
PAR ERR OUT PIA = 6
IRR
1418 15 Mar 68
anoth 108 parity error WC = 664205
MA = 234307
and again WC = 716305
MA = 262307
WC = 770771
MA = 242773
1505
Replaced the "Remote" + "Lical" lamps on the 545 MAG TAPE TRANPORT with #327 (28V) lamps. The Voltage on the lamps is 16V, and the lamps that had been used were #330 (which are rated at 14V.
J. Gleason
1800
QI STILL DOWN
Worked on QI. Replaced HV [veed?] relay with a relay on 110V line to HV supply. In order to do this, the "Voltage Present" circuit was disabled by disconnecting its HV input and grounding the output. HV now works fine but there semes to be some bug introduced by the previous HV arcs, No vidio output from camera.
may be a destroyed |
EN
|
