ENPages
181
page 151
1230 1430 19 March 1968 Core parity error 167 - MA = 213533 [unclear]MR or WC[/unclear] = 707531
ARR also MA = 225273 200633 204073 206533 206773 200633 205633 205373 213533 200633 200233 206533 2447 324473 210033 216533 [unclear]205373[/unclear] 253733
SRR
1500 19 March 1968 More of above. MA = 207633 [unclear]207483[/unclear] N 207633 233433 201633 202773 201773 202333 201633 207473 207433 207473 20 213773 3 213473 201273 201633
SRR
182
1510 19 Mar 68
167 parity error.
MA=327433
1515 another
MA=270073 257133 257233 316633
19 Mar 68 Mag tape does not see the start sticker on the tapes (rewind all the tape without stopping on the sticker).
PJV
March 19, 1968
The reason that the TV Camera's pan motor would not turn off was that motor relay for "Pan Right" was stuck closed. Although the relays that are used for the pan and tilt motors probably have adequate contact rating for the continuous motor current (0.25 Amp), they are really too small to handle the several-amp turn-on surge — especially when this surge occurs often, as when the motors are hunting (in a servo loop). The pan motors work all right now because the wires on the pan-right relay have been moved over to its unused contacts. If a similar failure occurs again, a new relay control box should be built using (six) 5 or 10 amp relays.
J. Gleason
0215 20 Mar 68
167 Parity error MA2 357267 DATA=0 - apparently [Parity?] bit dropped.
SRR
